DT830D Digital Multimeter With Lcd Display


An Easy to Read 3.5 Digit LCD Display.
Auto-Polarity for Direct Current Readings.
Auto Ranging which Selects the Correct Range for the Quantity Under Test to Get Most Significant Digits.
Type: Digital
Size: 21X15X5cm
Voltage Rating: 1000Vdc/750Vac Rms
Impedance: 1MOhm
Requires a 9V Battery
Capacity: 200 mV, 2000mV, 20V, 200V and 1000V (DC Voltage), 200µA, 2000µA, 20mA, 200mA and 10A (DC Current), 200V and 750V (AC Voltage), 200, 2000 Ohms, 20, 200 and Read More

2 in stock

SKU: AT0028|INS002 Categories: ,


830 series multimeters are pocket-sized 3 1/2-digit digital multimeters for measuring DC and AC Voltage, DC Current, Resistance, and Testing Diode. Some models also provide transistor test functions, signal output, or performing continuity tests. Overload protection and low battery indication are provided. The following table shows the functions of the series multimeters. This Product is known as Digital Multimeter, Multimeter, DMM, Haoyue DT830D, DT830D Multimeter, Multimeter Haoyue DT830D, Digital Multimeter Haoyue DT830D
1. This switch is used to select the functions and desired ranges as well as to turn ON/OFF the meter. To extend the life of the battery, the switch should be in the “OFF” position when the meter is not in use. Plug-in connector for red (Positive) test lead for current ( between 200mA and 10A ) measurement. There is no fuse for the “10A” jack. To use safely, each measurement can not last for more than 10 seconds and the interval between each measurement must be
more than 15 minutes.
3 1/2 digits, LCD(12mm)
3. “COM” JACK Plug-in connector for black (negative) test lead.
4. JACK Plug-in connector for red (positive) test lead for all voltage, resistance, and current ( up to 200mA ) measurements.
5. “10A” JACK
6. LIGHT SWITCH ( only for DT830BL ) Switch for ” torchlight ” and ” backlight “.


There are no reviews yet.

Be the first to review “DT830D Digital Multimeter With Lcd Display”

Your email address will not be published. Required fields are marked *